Lots of MGF parts for sale!

  • groovylee
  • Offline Topic Author
  • Qualified MGer
  • Qualified MGer
  • 1997 MGF 1.8i in COF
  • Posts: 604
  • Thanks: 165

Lots of MGF parts for sale! was created by groovylee

Posted 11 years 2 months ago #126851
Hi Guys, well, the MGF has gone, and has unfortunately been replaced by a fiesta, but that's what I need at the moment with my increased commute and two kids lol.

anyway, I didn't realise quite how much stuff I had left over, so I thought I would offer it to you guys first before I chuck it on fleabay. collection is preferred, and all items are in shefford, Bedfordshire. I don't mind posting some stuff, please drop me a PM for postage quotes etc. so here goes:

[IMG


genuine MGF mats, drivers side has fixings to stop it sliding about
was £45 new, asking £20 - prov sold to davesZ

[IMG


Perspex windstop, brand new, still wrapped, never unwrapped. has a MG decal in the packet which hasn't been fitted.

asking £20 PROVISIONALLY SOLD TO DAVEM PENDING POSTAGE ARRANGEMENTS

[IMG


cam lock tool - what can I say, used once, £5 posted within uk. SOLD TO PAULSMGF

[IMG


upgrade window stop - £4 posted never used. SOLD TO WHIZ

[IMG


pair of scoops in ok condition £2 + post

[IMG

[IMG

[IMG

[IMG

[IMG

[IMG


full set of calipers. the rears are used, and could do with a refurb. they have the handbrake mechanisms on them, and braided stainless hoses.
the fronts are both NOS and unused. one of them even has the original new brake pads still in them, all unused
asking £50 the lot, but am open to splitting the front and rears. FRONTS SOLD TO CARLVK. rears still available £28 posted

[IMG

[IMG

[IMG


pair of front grooved discs, with set of used (but loads and loads of life) EBC greenstuff pads, front and rear. the disks have some surface rust, but nothing a quick rub over with wire wool wont cure
£25 + post SOLD TO BADGER

[IMG

[IMG

[IMG


mike satur centre console red decal set. comprises the decals to cover the centre console for a Mk1, and the vents. comes with the original packaging, and a console wipe to clean prior to fitting.
£5 posted.

[IMG


number plate light £5 posted

[IMG


plain door tread plates - £5 posted

[IMG


engine bay fuse box complete with all fuses and lid £10

[IMG


oil filter £2 (unused obviously lol)

[IMG


bottom centre switch panel with 2 blanks and two window switches £5 SOLD TO COBBER

[IMG

[IMG


two manual mirrors in red, a little faded. I was going to wrap them in CF vinyl.... £2 + post (£4.50)

[IMG

[IMG

[IMG

[IMG

[IMG


job lot of headlight bits and pieces. enough to make two complete headlights, plus bits left over.
£25 SOLD TO COBBER

[IMG

saab boot release button (was going to use for the remote boot release mod, but never got round to it)
£3 posted SOLD TO COBBER

[IMG


clock and oil temp gauges, £2 the pair

[IMG


bottom switch plate with silver decal on it, and switches as pictured inc front fog switch
£5

[IMG


wheel centres, 2 different heights for some reason £2 posted SOLD TO BENSEWELL

[IMG


MG tax disc holder £3 posted - sold to MGF bush devil

[IMG


dash dimmer switch £3 posted

[IMG

hood handles and catches with pins and circlips
£4

[IMG


stalk set £5

[IMG


interior fuse box with fuses and relays £5

[IMG


brake light switch, repaired but good for an emergency spare £just pay postage

[IMG


footwell light panels £just pay postage

[IMG


mike satur ally pedal set - £10 SOLD TO PAULSMGF

that's all folks, im open to offers, and open to bulk postage/couriers etc, just PM me with youroffers and i'll let you know. whatever order the posts/PMs come in, is what order the stuff will be allocated :broon:

many thanks,

Lee

when your only tool is a hammer, all of your problems suddenly become nails.......

Last Edit:11 years 2 months ago by groovylee
Last edit: 11 years 2 months ago by groovylee.
The following user(s) said Thank You: DavesZed

Please Log in or Create an account to join the conversation.

Replied by paulsmgf on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126852
I'll have the pedals and the cam locking tool please

Please Log in or Create an account to join the conversation.

Replied by Leigh Ping on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126853
Some nice deals there Lee. Thanks for sharing them here. :broon:

Please Log in or Create an account to join the conversation.

  • groovylee
  • Offline Topic Author
  • Qualified MGer
  • Qualified MGer
  • 1997 MGF 1.8i in COF
  • Posts: 604
  • Thanks: 165

Replied by groovylee on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126854
all yours paul, will pm you in a bit

when your only tool is a hammer, all of your problems suddenly become nails.......

Please Log in or Create an account to join the conversation.

  • PQD44
  • Offline
  • Master MGer
  • Master MGer
  • It's only the first 100 years that are difficult
  • Posts: 4386
  • Thanks: 1269

Replied by PQD44 on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126855
Lee I know that DaveM from Australia is desperate for a windstop and so could I ask you hold off selling the one you have for a day and I'll pm him to come and take a look as I'm not sure if he is only after the mesh type.
by PQD44

Please Log in or Create an account to join the conversation.

  • groovylee
  • Offline Topic Author
  • Qualified MGer
  • Qualified MGer
  • 1997 MGF 1.8i in COF
  • Posts: 604
  • Thanks: 165

Replied by groovylee on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126856
provisionally held then mate :) cheers.

when your only tool is a hammer, all of your problems suddenly become nails.......

The following user(s) said Thank You: PQD44

Please Log in or Create an account to join the conversation.

  • PQD44
  • Offline
  • Master MGer
  • Master MGer
  • It's only the first 100 years that are difficult
  • Posts: 4386
  • Thanks: 1269

Replied by PQD44 on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126857
Thanks Lee, you're a gentlemen :beer:
by PQD44
The following user(s) said Thank You: groovylee

Please Log in or Create an account to join the conversation.

Replied by hawkster050671 on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126861
Hi there how much would it cost to send Perspex windstop to crawley west sussex rh107bx?
Would it fit a mgtf 135 2004?

Thanks

Paul

Please Log in or Create an account to join the conversation.

Replied by Davem on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126862
Yes I will take that windstop Thanks heaps Lee. Just gotta get it posted to Australia. If you can do it for me that would be really great. PQD44 was working on another deal and had the postage worked out from a fedex/ups website at around £50. Let me know but I will definitely take it.
Many thanks to PQD and Lee

[IMG]ht[/img]

by Davem

Please Log in or Create an account to join the conversation.

  • PQD44
  • Offline
  • Master MGer
  • Master MGer
  • It's only the first 100 years that are difficult
  • Posts: 4386
  • Thanks: 1269

Replied by PQD44 on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126863
Lee, would you please put my name on the grooved discs and the pads, I will need them to be posted or sent with a courier like parcels2go.

Many thanks

Paul
by PQD44

Please Log in or Create an account to join the conversation.

  • bensewell
  • Offline
  • Grand MGer
  • Grand MGer
  • A Bargain Spotter, Can-Do-er and eBay Addict!
  • Posts: 6036
  • Thanks: 750

Replied by bensewell on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126870
Bugger! I wanted those pedals lol

Please Log in or Create an account to join the conversation.

  • Cobber
  • Away
  • Moderator
  • Moderator
  • '97 MGF 1.8 MPI
  • Posts: 3097
  • Thanks: 1025

Replied by Cobber on topic Lots of MGF parts for sale!

Posted 11 years 2 months ago #126874
Ok I wanna put my hand up for the "job lot of headlight bits and pieces. enough to make two complete headlights, plus bits left over.", "saab boot release button" and the "bottom centre switch panel with 2 blanks and two window switches" please

"Keep calm, relax, focus on the problem & PULL THE BLOODY TRIGGER"

by Cobber

Please Log in or Create an account to join the conversation.

Time to create page: 0.581 seconds