New Game: - 'CTRL V'
- richandpaula
- Offline Topic Author
- Qualified MGer
- Posts: 996
- Thanks: 238
Post below by holding down 'ctrl' and pressing the 'V' button (paste)
My go first:
The Deadman Close function must be selected when the safeguarding of the main closing edge cannot be guaranteed, for example on a shop doorway (EN 12453).
Note:- The 'GO FUNCTION' is only possible if DIL switches 1 & 2 are both set to IMPULSE.
The 'OPEN' pushbutton input will also act as a 'GO FUNCTION' if this function is enabled.
The 'CLOSE' pushbutton input will always act as a close.
If selected (DIL3 OFF), the motor will run for the time set by the potentiometer (1-90s). This should be set for a few seconds longer than the door takes to open or close. This will allow the photocell / safety edge to be disabled when the door is fully closed - preventing the door from accidental re-opening.
Lets see what ya got! :whistle:
Please Log in or Create an account to join the conversation.
mine's empty? must go and copy something.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Regards
Chris
If your going to have one, Have a big one!
Please Log in or Create an account to join the conversation.
- richandpaula
- Offline Topic Author
- Qualified MGer
- Posts: 996
- Thanks: 238
really? wrote: mine's empty? must go and copy something.
Pre-meditated pastes do not count and will lead to disqualification :yesnod:
Please Log in or Create an account to join the conversation.
TicketSummary.Text := DataModule1.DSTicket.fieldbyname('Serenity.Ticket_Summary').AsString;
Please Log in or Create an account to join the conversation.
- richandpaula
- Offline Topic Author
- Qualified MGer
- Posts: 996
- Thanks: 238
:lol:
Please Log in or Create an account to join the conversation.
- highflyer1000
- Offline
- Journeyman MGer
- Posts: 80
- Thanks: 17
Total Plant cost when new - £2.4million + installation.
Approved via Ofgem for Renewable Obligation Certificate & eligible for Renewable Heat Incentive
ahhh right e-mail to client
Paul D
Please Log in or Create an account to join the conversation.
- David Aiketgate
- Offline
- David
- mgf mk2 freestyle mpi 16" wheels, in Anthracite.
- Posts: 20331
- Thanks: 4437
richandpaula wrote: And not one 'suspended' or 'banned' in the whole statement! :omg:
:lol:
Allright then
Define Troll : Const;
Troll.asstring = ('richandpaula');
Begin
If user.type := ('Troll') then User.Status = ('Banned');
end;
Please Log in or Create an account to join the conversation.
- richandpaula
- Offline Topic Author
- Qualified MGer
- Posts: 996
- Thanks: 238
Enters 'Best Behaviour' mode... :coat:
Please Log in or Create an account to join the conversation.
- David Aiketgate
- Offline
- David
- mgf mk2 freestyle mpi 16" wheels, in Anthracite.
- Posts: 20331
- Thanks: 4437
David
:shrug:
Please Log in or Create an account to join the conversation.