back and in need of some help! please

back and in need of some help! please was created by frankm83

Posted 13 years 7 months ago #22823
Hi all haven't been on here chatting for a while tho I've been comin and reading a bit what's happenin! been busy at home and with some problems which now I'm happy to say are over, sun is shining with tempreture over 23 degrees here and so I decied I take the MG out of hibernation and off for a spin but a couple of minutes in the run, came to a roundabout, braked a bit hevaily on some water from a guy wahsing his car and skidded and I ended on the roundabout! :( Result 3 broken wheels 2 damaged suspensions there's a damaged rear hub and a front wishbone a big dent from a tree on the rear RH wing which cna be pulled out but there's quite some nasty damage on the sill just under the driver's door, the insurance surveyor can't seem to find any parts locally so he gave me the job of doing this till tomorrow, found almost everything from the UK except the part I need most the rear wing complete with sill, talked to Rimmer but they don't seem too enthusiastic on sending the part over to Malta does anyone know anywhere else where I can buy this part, XPart sent me to my local ex MG Rover dealer who told me will have to see if he can find the part (I'm sure he won't even try) , welovemgfs, mgfntfbitz and gtmgftf don't want to send the part! and I don't want to have a sill full of filler!! :( I don't need the whole wing even just the sill the length of the door would be enough! Thanks for your help

FM :rolleyes:

Please Log in or Create an account to join the conversation.

Replied by David Aiketgate on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22824
Wow, Frank, that's terrible luck!:omg:

Have you tried MGFheaven(used to be VVCSteve)?

Failing that - could you pay and have it delivered to me, to post on to you? Unless there's someone on the forum who's near to one of these places that could pick it up for you and post on?:shrug:

David
:shrug:

Please Log in or Create an account to join the conversation.

Replied by frankm83 on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22827
Thanks Dave as always very helpful

I'm hoping Rimmer will get back to me with a postage price but their new wing costs over €500 (which is sorta OK as it's the insurance paying tho they did tell me they have a budget in mind!)

and GTMGFtF has this in stock but it is a bit shorter than I need bu it would still help!

they are located in Walsall I beleive

recently I sold a Morris Minor pick-up side to the UK, the buyer got TNT and it only cost him £80!

FM :rolleyes:

Please Log in or Create an account to join the conversation.

Replied by David Aiketgate on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22830

frankm83 wrote: Thanks Dave as always very helpful

I'm hoping Rimmer will get back to me with a postage price but their new wing costs over €500 (which is sorta OK as it's the insurance paying tho they did tell me they have a budget in mind!)

and GTMGFtF has this in stock but it is a bit shorter than I need bu it would still help!

they are located in Walsall I beleive

recently I sold a Morris Minor pick-up side to the UK, the buyer got TNT and it only cost him £80!

i think Rimmers will post, I know they posted stuff to Vancouver recently.:yesnod:

David
:shrug:

Last Edit:13 years 7 months ago by David Aiketgate
Last edit: 13 years 7 months ago by David Aiketgate.
The following user(s) said Thank You: frankm83

Please Log in or Create an account to join the conversation.

  • cjj
  • Offline
  • Administrator
  • Administrator
  • The future is vented.
  • Posts: 6411
  • Thanks: 1331

Replied by cjj on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22836
Assuming it is a TF.

There is one in the Netherlands, not sure if it is easier for them to transport it to you

http://thepart.com/en/search/details.mhtml?id=49392232

ANother Clicky

The hubs are available on e-bay for around £35 new

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110601875160&ssPageName=STRK:MEWAX:IT
Last Edit:13 years 7 months ago by cjj
Last edit: 13 years 7 months ago by cjj.
The following user(s) said Thank You: frankm83

Please Log in or Create an account to join the conversation.

Replied by frankm83 on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22852
many thanks Clive will try and contact them hoping they speak English! :)

about the hubs does it matter if its ABS car or not?

FM :rolleyes:

Please Log in or Create an account to join the conversation.

Replied by David Aiketgate on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22853

frankm83 wrote: many thanks Clive will try and contact them hoping they speak English! :)

about the hubs does it matter if its ABS car or not?


You can use ABS Hubs on a non ABS car.:yesnod:

David
:shrug:

Please Log in or Create an account to join the conversation.

Replied by DRIFTINGIN on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22857
Try ebay ..Its often worth the looking .

Please Log in or Create an account to join the conversation.

Replied by frankm83 on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22858
Thanks Dave mine is an ABS model

yes looked on Ebay no luck at the moment

still awaiting reply from rimmer and will give the netherlands guys a call later

FM :rolleyes:

Please Log in or Create an account to join the conversation.

Replied by David Aiketgate on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22859

frankm83 wrote: Thanks Dave mine is an ABS model

yes looked on Ebay no luck at the moment

still awaiting reply from rimmer and will give the netherlands guys a call later


In that case, you can't use a non ABS Hub on an ABS Car.:lol:

David
:shrug:

Please Log in or Create an account to join the conversation.

Replied by Rich in Vancouver on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22862
Rimmers ships parts to me in Canada. The delivery is 3 days via UPS.
They will ship large items (The last was a set of coolant pipes)
It could just be a shipping issue to Malta. Maybe their usual carriers don't go there or have had problems?
(Just speculation of course...Maybe one of the Rimmer brothers had a bad experience with a Maltese girl?:ohmy: )

Cheers,
Rich
Last Edit:13 years 7 months ago by Rich in Vancouver
Last edit: 13 years 7 months ago by David Aiketgate.

Please Log in or Create an account to join the conversation.

Replied by frankm83 on topic Re: back and in need of some help! please

Posted 13 years 7 months ago #22866
I'm happy!

just ordered one form Moss Europe, hope they dispatch soon shipping was just £160 via TNT whereas Rimmers quoted £680 for shipping only exc VAT!!!! that's one hell of a difference! :D

ordered the hub also, the one Clive pointed me to now I need a front wishbone lots of variety of prices on Ebay!

FM :rolleyes:

Please Log in or Create an account to join the conversation.

Time to create page: 0.921 seconds