Re:Engine Oil

Engine Oil was created by Pyrolisis

Posted 3 years 4 months ago #196479
Hello everyone.
I am new to your group and new to MG ownership.
My TF came with no owners manual.
I just want to keep her shipshape and wondered what grade of engine oil I should use.
She is a 2005 TF SPARK 135.
Also, could someone out there give me the tyre pressures.
Any help will be greatly received.

Please Log in or Create an account to join the conversation.

Replied by sworkscooper on topic Engine Oil

Posted 3 years 4 months ago #196481
Hi and welcome to the forum .
A good quality 10 - 40 and of course same goes for a good quality filter is what I use . Don't forget to lubricate the filter gasket
John
The following user(s) said Thank You: Pyrolisis

Please Log in or Create an account to join the conversation.

Replied by neilpinleeds on topic Engine Oil

Posted 3 years 4 months ago #196483
For normal driving the manual says 26lb front 36ib rear for the tyre pressures.
The following user(s) said Thank You: Pyrolisis

Please Log in or Create an account to join the conversation.

Replied by Steve on topic Re:Engine Oil

Posted 3 years 4 months ago #196484

Pyrolisis wrote: Hello everyone.
I am new to your group and new to MG ownership.
My TF came with no owners manual.
I just want to keep her shipshape and wondered what grade of engine oil I should use.
She is a 2005 TF SPARK 135.
Also, could someone out there give me the tyre pressures.
Any help will be greatly received.

As mentioned previously 10/40 Semi synthetic for oil alond with quality filter, tyre pressure for a TF is different to the F due to suspension difference but I think 28F 36R should be somewhere close, Google will probably confirm if your in a hurry.

Sent from my SM-G981B using Tapatalk
by Steve
The following user(s) said Thank You: Pyrolisis

Please Log in or Create an account to join the conversation.

Replied by David Aiketgate on topic Re:Engine Oil

Posted 3 years 4 months ago #196488
:welcome2: 

David
:shrug:

Please Log in or Create an account to join the conversation.

Time to create page: 0.481 seconds