MGF 1.8 R-Reg reluctantly breaking
Replied by Tsleight on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40761What about the front indicator lights? The inner brackets are snapped on mine...
Tim
[img]i54.tinypic.com/2hdto4p.jpg[/img]
Please Log in or Create an account to join the conversation.
Can't see this being a hard job and they should be in good condition. £15 for the pair.
Thanks tony
Please Log in or Create an account to join the conversation.
- bryan young
- Offline
- Master MGer
- Posts: 3631
- Thanks: 773
Replied by bryan young on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40766Tonym3 wrote: Based in brentwood Essex,
As for the dash how does £75 sound?
As for the hydragas spheres, I had to google to find out what they are!! I'm guessing they could be a real pain to remove so not sure about price if you can point me in the right direction for removal I will come up with a price
Thanks
Tony
Tony you can ask any questions on here as to which bit goes where etc, and i am sure you will not be stitched up :slapme:
You need to depressurise the Hydragas system first (its about 400psi) and its best done with a machine. you could get Russell Walsh MG Rover Solutions to do this for you (about £30) and he is not too far away. his details are in the glovebox above. Good spheres are about £20 each on ebay Clearly mark the rears as they are different from the front.
Please Log in or Create an account to join the conversation.
Replied by Tsleight on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40767[img]i54.tinypic.com/2hdto4p.jpg[/img]
Please Log in or Create an account to join the conversation.
- a Guest
- Visitor
- Thanks: 0
Replied by a Guest on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40768Let me know how much, if you use Russel, and hopefully you have a paypal acount so I can pay that way ..
Thanks
Jan
Please Log in or Create an account to join the conversation.
- bryan young
- Offline
- Master MGer
- Posts: 3631
- Thanks: 773
Replied by bryan young on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40769Tonym3 wrote: Hi Tim I assume you mean the main ones at the front not the side repeaters,
Can't see this being a hard job and they should be in good condition. £15 for the pair.
Thanks tony
:rant: :rant: Dont break the side clips getting them out!!! which is a common problem ( you cant buy the lenses seperately and the lamps are about £30 each new) if you break the clips they wont stay in place :rant:
What are the headlamps like?? Could you take a photo and post it here or email me on [email protected] i need a pair that i can get refurbished (the dipped beam section goes milky and is a MoT failure)
Please Log in or Create an account to join the conversation.
- a Guest
- Visitor
- Thanks: 0
Replied by a Guest on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40770I was just about to ask about the headlights
There is no rush on the spheres, so don't worry, they are going in my spares box
Please Log in or Create an account to join the conversation.
- David Aiketgate
- Offline
- David
- mgf mk2 freestyle mpi 16" wheels, in Anthracite.
- Posts: 20330
- Thanks: 4436
Replied by David Aiketgate on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40774David
:shrug:
Please Log in or Create an account to join the conversation.
Headlights shouldn't be a problem I will try getting them off at the same time as the indicators, however due to high demand they are now very expensive!!!!! (thanks softly!!)
Only joking I will get them off and take some pictures with regards to price does £25 for the pair sound right?
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
- a Guest
- Visitor
- Thanks: 0
Replied by a Guest on topic Re: MGF 1.8 R-Reg reluctantly breaking
Posted 12 years 9 months ago #40777As for the headlights charge him £50
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.