Wheel Arch Rust Assessment (Prior to purchase)
Replied by TA22GT on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 15 hours ago #209937Before I reply to your post on painting the arches I have to comment on the price.
I'm new to MG's but not new to fixing or restoring cars and for £5k that car should be rust free!
Others may agree or disagree with me but it seems way overpriced to me.
I bought a 2002 TF135 this September with 34k miles that is totally rust free both on top and underneath so to me it looks overpriced.
At 5k it should have no rust and a perfect gear lever gaiter.
I'm sure others will make their own observations to help you.
Before you part with cash get a feel for what others think.
Please Log in or Create an account to join the conversation.
- KidCreation
- Offline Topic Author
- Apprentice MGer
- Posts: 23
- Thanks: 3
Replied by KidCreation on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 14 hours ago #209938Please Log in or Create an account to join the conversation.
Replied by EllisoJo on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 14 hours ago #209939"there was an advisory for front suspension arms corroded (but not weakened) so they'll need doing at some point"
These lower arms are notorious for collecting water & mud and therefore corrode. Either use this as a way to get the price down, or find a better deal!
Please Log in or Create an account to join the conversation.
- KidCreation
- Offline Topic Author
- Apprentice MGer
- Posts: 23
- Thanks: 3
Replied by KidCreation on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 14 hours ago #209941The gasket, cambelt, clutch and cooling pipes give me some confidence that it's not a pup at least, though as with any used car (especially a classic, you can never be totally confident)
Please Log in or Create an account to join the conversation.
Replied by TA22GT on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 13 hours ago #209942I don't know enough about the rarity of that model but others will and I am sure be able to enlighten both of us.
Just because it is rare doesn't mean it is worth top whack..it has to be in top condition too and I get the feeling the seller is banking everything on it's rarity as if that overcomes condition.
I got lucky and bought the right car and I love it..I am learning about it as I go along but I absolutely love driving it. They are fun cars and I am sure you will love ownership of one.
Lets make sure this is the right one.
Please Log in or Create an account to join the conversation.
Replied by TA22GT on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 4 hours ago #209943Hiya...a few pics of my car..only to show you what is out there and not to say " look at me"...I'm concerned you get bitten!
You can pick up a really, really ggod MGF or TF for £3k all day long privately.
When I researched buying an MGF TF I wanted a 160. Was dead set on that but a lot of those I looked at for sale looked tired or thrashed, not all, so I widened my horizon and found this car.Almost fsh 34k and £2200. The seller wouldn't budge on price because he knew it was a really solid car.
It doesn't bother me in the least that it's not a 160 because I can pedal this thing really fast without ever thrashing it.
The black sills on that car look like it is black Stonechip which needs to be lacquered because it is not waterproof and it looks like it is washing off..underseal doesn't wash off. Most people would stonechip it in white and then paint it the body colour..to me it is hiding something.
I have a car up for sale that is not a MG but is a limited edition of the model. I am asking 5k but it is pristine everywhere and a good solid car for someone to enjoy.
I enclose a pic so you can see the quality you should be seeing if you are spending £5k on a 22 yr old classic car.
THIS IS NOT A FOR SALE AD!
Mods please remove it if I have broken forum rules! It is to show the OP that the yellow car is not in that league!
Please Log in or Create an account to join the conversation.
- KidCreation
- Offline Topic Author
- Apprentice MGer
- Posts: 23
- Thanks: 3
Replied by KidCreation on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 3 hours ago #209944With all this in mind I'm not sure what I would consider to be a "good price" for that Sunspot, I'm confident I could get him down but don't know how much it would need to be by before it becomes worthwhile.
I've definitely seen cheaper ones out there, mostly 135s (or of course the 1.6 which id rather not go for) it was mostly all the mechanical work that drew me to this one, as well as the x-power hoops which are my preferred style (each to their own as I know everyone has their thoughts on the different hoops available)
Yours does look great, as does your mx5 (which lets face it we all know is the more traditional and some might say more sensible route into 2 seater B roading, but sensible isn't always what matters)
I'm still keeping my eyes open but definitely curious as to what price people think would make the sunspot more appealing...
Please Log in or Create an account to join the conversation.
- Notanumber
- Offline
- Qualified MGer
- Posts: 979
- Thanks: 162
Replied by Notanumber on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 3 hours ago #209945160s are top of the MG TF tree for performance and there were fewer of them made but they were still a standard part of the range rather than a low production special. They are therefor worth a bit more than an equivalent 115 or 135 but not by a massive margin. We aren't talking the value difference between a 1.1 base Mk1 Escort vs an RS Mexico here or a BMW 318 vs an M3, nothing like it..
There is a much wider gap in values for the earlier MGFs as the Trophy 160 which came along late in the MGFs product lifecycle, differed in so many respects from a standard MGF. When it came to the introduction of the TF though the 160 was a standard production model with a VVC engine and options such as spotlights as standard..
Id expect to pay around £ 1.8k to £ 2.5k for that car, from that seller, in that condition, with that provenance. To my mind £ 4k to £ 5k would be justified for an issue free, low mileage, single owner car offered with a full service history that had just had a service and a cam belt change, sold by a specialist dealer with a reputation.
Because values of good condition Fs and TFs fall within a lot of people's reach for a weekend car, it has made MOT failures and cars with any issues, blemishes or problems worth very little. Hence there are several of us here who have bought cars without an MOT or with various known problems for a few hundred and got them up to scratch as viable road going cars with a few weekends spannering, There are some very good threads here that will show what is involved, its worth investing your time to read through them to familiarise yourself with both common faults and how they are tackled by owners.
.
It makes me chuckle though when I hear sellers mention in passing the front lower arms may just need replacing at some point as though it's a ten minute job. These wishbones are a simple hollow steel pressing which routinely fill with surface water during use that has no where to exit. They inevitably rust through from the inside over time and a pinhole in a wishbone one year will turn into a proper sized hole the next, a certain MOT failure. To replace it the front subframe has to be lowered to provide enough clearance with sheared subframe bolts being quite a common occurrence as they are smallish bolts that are unlikely to have been disturbed since the car left the factory. If in doubt, lean on the seller to change the wishbones in return for leaving them a decent sized cash deposit on the car.
Out of interest Len' on the forum is having to sell the TF he has been fastidiously restoring, you wont find any flaky pint or hidden faults on this one: https://www.the-t-bar.com/forum/9-mgf-tf-pitstop/99251-light-at-the-end-of-the-tunnel-is-getting-brighter
2003 TF 135 sunstorm
Please Log in or Create an account to join the conversation.
- Notanumber
- Offline
- Qualified MGer
- Posts: 979
- Thanks: 162
Replied by Notanumber on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 3 hours ago #2099462003 TF 135 sunstorm
Please Log in or Create an account to join the conversation.
Replied by TA22GT on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 3 hours ago #209947I'm hoping others comment too but nobody likes to put down a car that someone is interested in.
You say that you are happy that the mechanical side looks good and I agree but it is rust that kills these cars.
I can do any mechanical work...rebuild the engine or gearbox but I don't have acces to do welding and serious rust work on these cars. For me the car had to be rust free for the rest I can do.
You will learn the mechanical skills needed to look after these cars far easier than the skills needed to restore a rotten chassis.
Any chance of more pics of the car..inside and out? We are making huge assumptions on arch pics!
You seem like a decent guy wanting to buy his first classic car, excited to get the one thst excites you...I...we...just want it to be one you will grow in to and not dread the MOT on dodgy subframes.
Please Log in or Create an account to join the conversation.
- Airportable
- Offline
- Senior MGer
- Posts: 2201
- Thanks: 506
Replied by Airportable on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 2 hours ago #209948Our cars aren’t the most obvious or the “sensible money” (I vehemently disagree) when it comes to inexpensive sorts cars & so someone drawn to them will have to suffer the birth pangs of purchase, learning the ropes & possibly ridicule from “those who know far more than you”. As with child birth these formative interactions cement a firm bond. If we all chip in with our two penuth it could end up as a proscription; to continue the child birth indium, a cesarean.
Trophy cars have done an amount of work on it & although their reputation isn’t blemish free, they couldn’t afford a fancy showroom on the Great North Road if they were rubbish & Jon from Rough Luck has also worked on it.
When he did work for me, he gave my car the once over & was complementary, that was before work started. A crap car not worth the work would have been commented on I’m sure.
Please listen to our comments but make your own mind up. A 160 in yellow is going to stand out & who wouldn’t want that, I normally like to sink in to the middle distance but I suspect a tf in yellow going sideways around a corner might just attract me into the drivers seat
Had it a black leather interior?
However, Caveat Emptor.
M
Please Log in or Create an account to join the conversation.
- KidCreation
- Offline Topic Author
- Apprentice MGer
- Posts: 23
- Thanks: 3
Replied by KidCreation on topic Wheel Arch Rust Assessment (Prior to purchase)
Posted 4 weeks 2 hours ago #209949Notanumber, i'll probably drop Darren an email, see what his thoughts are, so thanks for that, had a quick look at that website earlier while i was pricing up "worst case scenario" types of things (e.g. how much is a subframe, how much are suspension arms etc)
TA22GT unfortunately i didn't take more photos because in honesty i simply didn't notice anything else that gave me concerns, however the dealer does have some photos on their page which can be seen here (don't worry, the alpine system would be getting removed and gifted to my local nova driver, i just don't like these big screen things, whether floppy like this or a superglued iPad from a tesla)
Airportable, thanks, some very good points there and i think heart vs head is always going to be a big factor here, and yes it does have the black leather interior ( Link Here ) though i'll put a big chavvy hat on for a second and say part of me wants to replace the gaitors with yellow ones (i'll see myself out and ensure the door hits me in doing so)
Please Log in or Create an account to join the conversation.