Hi! I just bought an MG TF from 2003 and need some advice

Welcome to the T Bar!🖐

Good morning!
I'm new here too and having bought my first TF just a month ago I had the same concerns as yourself!
As I read through the forum I began to realise that the HG is a weakness but it's not the end of the car. 
I see it is your first car so I would advise to learn "mechanical sympathy" as you drive along. If you suddenly hear a noise then investigate it sooner rather than later. Keep your eye on the water temp gauge as you drive until you get to know how the car behaves. Don't be parranoid but they are old cars now and like any make of old car they need looking after.
The fortunate thing is they are very easy to love and become attached to so caring for them naturally follows!
I am loving mine! Absolutely love driving every mile.
There is so much knowledge on this site and as you read through it you will realise that people go out of their way to help.
Best wishes.

I do like the expression “mechanical sympathy” as used by our friend TA22GT, it might be an interesting addition to the riggers of the driving test.
Mind you when you observe the lack of ability & “roadmanship” of many drivers these days it makes you wander whether there are any riggers at all!
It wasn’t too long ago that the sight of a car with the bonnet raised at the roadside was unusual, now with the lack of Mech’Symp you might see several even on a short journey.
Just keep pumping fuel in & well just keep pumping fuel in. A Service, what’s that?
A fresh car is another language you have to learn & the more you study the quicker you learn. You also need the text book, crib notes & folk around you who will teach you polite parlance & the slang.
In T-Bar you have all that & Cobber for free.
An assiduous learner is never a liability.
You might be starting with an existing tool kit & fair dos if not buy wisely & buy quality but unless you are going to use them day in & out don’t end up a Snap-On sucker.
You can get some eBay bargains, I’ve had Britool spanner as new for a song, 8,10,13,15,17 & 19mm ring/open ended 3/8” sockets & good ratchet, extension bar.
Other hand tools are common sense. A test meter, a battery/buzzer tester for continuity.
And if you don’t have one fitted, a good low coolant warning system (see Bruce).
M

thank you very much, roughly how many Litres of oil and coolant is needed?

thank you very much for the advice, would you say the coolant warning system from MGOC spares is a good bet?

It’s all there in the library, have a look there & download what you could find useful. I’m not being obtuse, I can’t remember & I’m not in the workshop.
Google it, it’s all there & Bruce’s low coolant monitor is used by loads of folk on here.
Come on Bruce, give us a wave!
I made my own as I’ve changed certain aspects of my coolant system.
M
M

SynchroMesh wrote:

thank you very much, roughly how many Litres of oil and coolant is needed?

I just changed my oil and filter. It took about 4.5 ltrs.  
Mine had been changed about 1000 miles before I got it with cheap oil so I did it again so that I know what is in it and when I put it in! 
Haven't touched the cooling system yet apart from checking the level.
 

+1 for the low coolant alarms that our forum colleague Bruce Cotsell makes. Look for "MGF / MG TF - LOW COOLANT ALARM KIT - No Drilling Required - THE ORIGINAL! " on Ebay from seller Bcotsell. 
They are one of the more cost effective low coolant alarms, it utilises your existing coolant bottle,and is easy to fit.  Ive done 2 of them. 
If Bruce spots this thread on the forum he may offer a discount for ordering directly.


It's worth bookmarking Mgfntfbitz site. Beside whats on their website they have a lot of good 2nd hand parts so it's worth dropping them an email to check when you need something. Excellent to deal with and its rare for me to go anywhere else..

You havent said whereabouts you are on the planet ?

Im in London. I made the post very late at night. thanks for the recommendation this will save me a huge amount of money

I just found this on YT.  I'm not affiliated in any way but it will give you some insight in to a coolant alarm system.

Coolant Alarm.

There numerous ways to a low coolant warning alarm, this is what I used for a replacement expansion tank, they are better made than the MG one and are fitted with two prongs for sensing the coolant level, some vendors include the plug and a length of wire as this one does.
VW Volkswagen Polo 6R Coolant Reservoir Expansion Tank Fluid Bottle 6Q0121407B Completed
I used the LOW water level version of this HIGH level alarm; High Water Level Silent Alarm With Random Colour Flashing LED 12V Buy It Now
The seller will list one if you ask, because I have lost all of my high frequency hearing a buzzer is of no use to me but they  do make one with a buzzer. Installation is simple, after mounting the tank with a short strip of metal for a bracket, you then connect the two white wire (they need to be extended to reach) to the expansion tank plug, then a source of power (I got mine from the USB charger that replaced the cigarette lighter)  and fit the warning light. I placed the light in one of the switch blanks in front of the gearlever, when the LED flashes in alternating colours you will certainly see it. I got the idea from someone on the MGF Register

TA22GT wrote:

I just found this on YT.  I'm not affiliated in any way but it will give you some insight in to a coolant alarm system.

Coolant Alarm.
 

That is the Browns & Gammon unit, which I have, it is excellent, very easy to fit and  over 10+ yrs has not given me any trouble or false alarms.